Preliminary Procedures

1. Remove the inflatable restraint steering wheel module. Refer to Steering Wheel Inflatable Restraint Module Replacement.
2. Remove the steering wheel control switches. Refer to Steering Wheel Control Switch Assembly Replacement.

1

Manual Shift Position Switch Screw (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tip
Remove the manual shift position switch screws.

Tighten
3.5 N·m (31 lb in)

2

Manual Shift Position Switch (Qty: 2)

Tip
Disconnect the electrical connectors from the from the switches.