Automatic Transmission Fluid, Fluid Pan and/or Filter Replacement. Chevrolet Corvette 2007

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2007 🢒 Corvette 🢒 General Information 🢒 General Information 🢒 Automatic Transmission Fluid, Fluid Pan and/or Filter Replacement

Callout

Component Name

Notice: Use Dexron VI transmission fluid only. Failure to use the proper fluid may result in transmission internal damage.

Transmission Fluid Pan Bolt (Qty: 18)

Notice: Refer to Fastener Notice in the Preface section.

Tip
Tighten the bolts in the sequence shown.

Tighten
9 N·m (80 lb in)

Transmission Fluid Pan Assembly

Tip

•	Check the condition of the draining fluid. Refer to Transmission Fluid Check .

•	Fill the transmission with the proper fluid. Refer to Transmission General Specifications and Transmission Fluid Fill Procedure .

•	Fill the transmission with the proper amount of transmission fluid. Refer to Fluid Capacity Specifications and Transmission Fluid Check .

Transmission Fluid Pan Gasket

Tip
The fluid pan gasket is reusable. Inspect the gasket to determine if it may be reused.

Fluid Filter Assembly

Tip

•	Pull the fluid filter assembly straight out. Do not bend or twist the filter neck.

•	Use a new fluid filter assembly.

Fluid Filter Seal Assembly

Notice: Do not damage the case sealing surface when removing the filter seal assembly.

Tip

•	Use a screwdriver or snap ring pliers to remove the filter seal.

•	Use the DT 47848 and the J 42183 to install the filter seal.

•	Use a new fluid filter seal assembly.

•	Lubricate the filter seal with transmission fluid before installing the filter.

•	DT 47848 Seal Installer

•	J 42183 Driver Handle