GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Chevrolet
🢒
2007
🢒
Corvette
🢒
Brakes
🢒
Park Brake
🢒 Parking Brake Shoe Replacement
Removal Procedure
Caution:
Refer to
Brake Dust Caution
in the Preface section.
Remove the brake rotor. Refer to
Rear Brake Rotor Replacement
.
Remove the wheel bearing/hub. Refer to
Rear Wheel Bearing and Hub Replacement
.
Rotate the parking brake adjusting nut until all park brake shoe adjustment has been removed.
Remove the parking brake shoe retaining spring.
Remove the park brake shoe assembly by grasping the shoe and spreading slightly while pulling the shoe from the actuator assembly.
Installation Procedure
Install the park brake shoe assembly by grasping the shoe and spreading slightly while pulling the shoe over the actuator assembly.
Install the parking brake shoe retaining spring.
Adjust the parking brake shoe-to-drum clearance. Refer to
Park Brake Adjustment
.
Install the wheel bearing/hub. Refer to
Rear Wheel Bearing and Hub Replacement
.
Install the brake rotor. Refer to
Rear Brake Rotor Replacement
.