Schematic Reference: Column Lock Schematics and Instrument Cluster Schematics

Connector End View Reference: Steering Wheel and Column Connector End Views and Displays and Gages Connector End Views

1

Did you perform the Diagnostic System Check - Vehicle?

Go to Step 2

Go to Diagnostic System Check - Vehicle

1. Turn OFF the ignition.
2. Disconnect the steering column electronic lock.
3. Turn ON the ignition

Is the Service Column Lock message displayed?

System OK

Go to Step 3

Important: Always perform the setup procedure for the SCLCM. Refer to Control Module Setup .

1. Replace the steering column lock control module. Refer to Steering Column Lock Control Module Replacement .
2. Perform the setup procedure for the steering column lock control module.

Did you complete the replacement?

System OK

--