Valve Rocker Arm Cover Removal - Left Side 7.0L
- Remove the spark plug wires (724), as required.
- Remove the ignition coil bracket studs (720).
- Remove the ignition coil and bracket assembly (719).
- Disconnect the ignition coil electrical connectors.
- Remove the bolts (723), coils (722), and wire harness (721) from the bracket, as required.
- Remove the valve rocker arm cover bolts (516) and cover (505).
- Remove and discard the valve rocker arm cover gasket, valve rocker arm cover grommets and valve rocker arm cover bolts if they are serviced with the grommet.
- Remove the gasket (504) from the cover.