Intake Manifold Removal 7.0L
Important: The intake manifold, throttle body, fuel injection rail, and fuel injectors may be removed as an assembly. If not servicing the individual components, remove the manifold as a complete assembly.
- Remove the manifold absolute pressure (MAP) sensor (714).
- Remove the seal (715) from the sensor, as required.
- Remove the evaporative (EVAP) emission clip (740),
bolt (742), bracket (741), canister purge solenoid valve (730), and tubes (729, 735).
- Remove the intake manifold bolts (512) and fuel rail stop brackets (712).
- Remove the intake manifold (500).
- Remove the intake manifold gaskets (514).
- Discard the intake manifold gaskets.