For 1990-2009 cars only
- Note the location of the fuel rail ground strap (557).
- Remove the bolts (511), ground strap (557), and fuel rail with injectors (510). Lift evenly on both sides of the fuel rail until all injectors have left their bores.
- Remove the retainers (521) and fuel injectors (533).
- Remove the O-rings (532, 534), as required.
- Remove the cap (523) and service valve (524), as required.
Caution: Refer to Fuel Rail Stop Bracket Installation Caution in the Preface section.
Important:
• The intake manifold, throttle body, fuel injection rail and fuel injectors may be removed as an assembly. If not servicing the individual components, remove the intake manifold as a complete assembly. • Do not separate the fuel injectors from the fuel rail, unless component service is required. • Use cleanliness and care when handling the fuel system components. Do not allow dirt or debris to enter the fuel injectors or fuel rail components. Cap ends as necessary.
