GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2007 🢒 Corvette 🢒 Engine 🢒 Engine Mechanical - 6.0L 🢒 Oil Level Indicator and Tube Installation

    Object Number: 639837 Size: SH
  1. Inspect the O-ring seal for cuts or damage. If the oil level indicator tube O-ring seal is not cut or damaged, it may be used again.
  2. Lubricate the O-ring seal with clean engine oil.
  3. Install the O-ring seal onto the oil level indicator tube.
  4. Install the oil level indicator tube into the engine block and rotate into proper position.

    5. Notice: Refer to Fastener Notice in the Preface section.

  5. Install the tube bolt.

    6. Tighten
    Tighten the oil level indicator tube bolt to 25 N·m (18 lb ft).

  6. Install the oil level indicator into the tube.