GM Service Manual Online
For 1990-2009 cars only

Head Up Display (HUD) Bezel Warped from High Ambient Temperature/UV Rays (Replace Bezel)

Subject:Head Up Display (HUD) Bezel Warped From High Ambient Temperature/UV Rays (Replace Bezel)

Models:2005-2007 Chevrolet Corvette



Do This

Do Not Do This

Replace the HUD bezel.

Do not replace the IP carrier.

Condition

Some customers may comment that the bezel for the Head Up Display (HUD) is warped.

Cause

The bezel may be warping from heat and the sun's UV rays.

Correction

Notice: Use care to avoid damage to the head up display (HUD) lens when removing and installing the HUD bezel. The HUD lens is fragile. Failure to carefully remove/install the bezel can lead to HUD lens damage.

Replace the Head Up Display (HUD) bezel.


    Object Number: 1865791  Size: SH
  1. Use a plastic trim stick and pry the front (closest to the windshield) inside edge of the bezel up in order to clear the locking tab.
  2. Slide the bezel forward toward the windshield to release it.
  3. Lift up and remove the bezel.
  4. Install the new bezel in the opening and slide it rearward to lock it in place.

Parts Information

Part Number

Description

19121990

HUD Bezel

Warranty Information

For vehicle repaired under warranty , use:

Labor Operation

Description

Labor Time

C9776*

Replace HUD Bezel

0.2 hr

*This is a unique labor operation for bulletin use only. It will not be published in the Labor Time Guide.