Possible Seal Leak And Axle Seal Popped Out Of Position - keywords axle differential fluid

The following diagnosis might be helpful if the vehicle exhibits the symptom(s) described in this PI.

Fluid leaking from the rear differential output shaft seal area and the seal would be found to be popped out of position. The seal may also appear to fit loosely in the cover.

Replace the output shaft seal and prior to seal installation apply a bead of RTV sealant to the outer portion of the seal that contact the cover. Let the sealer dry prior to operation.

Please follow this diagnostic or repair process thoroughly and complete each step. If the condition exhibited is resolved without completing every step, the remaining steps do not need to be performed.