Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the front bumper fascia. Refer to Fascia, Valence, Fascia Close Out Panel Replacement - Front Bumper .
3. Disconnect the front fog lamp bulb socket electrical connectors.

1

Front Fog Lamp Mounting Screws (Qty: 3)

Tighten
4 N·m (35 lb in)

2

Front Fog Lamp

Tip
Lower the fog lamp in order to release the upper alignment pins from the tabs on the front fascia.