GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2006 🢒 Corvette 🢒 Body 🢒 Interior Trim 🢒 Windshield Side Garnish Molding Replacement

Removal Procedure

    Object Number: 71178 Size: SH
  1. Remove the hinge pillar trim panel. Refer to Body Hinge Pillar Trim Panel Replacement .
  2. Grasp the windshield side garnish molding.
  3. Pull the molding away from the windshield frame.
  4. Disconnect the electrical connector.

Installation Procedure
  1. Connect the electrical connector.

    2. Object Number: 71178 Size: SH
  2. Position the windshield side garnish molding to the windshield frame.
  3. Push the molding inward snapping the retainers into the windshield frame.
  4. Install the hinge pillar trim panel. Refer to Body Hinge Pillar Trim Panel Replacement .