Engine Oil Temperature Gage Sensor Replacement. Chevrolet Corvette 2006

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2006 🢒 Corvette 🢒 Body 🢒 Instrument Panel, Gages, and Console 🢒 Engine Oil Temperature Gage Sensor Replacement

Callout	Component Name
Notice: Refer to Fastener Notice in the Preface section. Fastener Tightening Specifications: Refer to Fastener Tightening Specifications. Preliminary Procedure Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle. Remove the RF tire and wheel assembly. Refer to Tire and Wheel Removal and Installation. Remove the RH front wheelhouse rear liner. Refer to Fender, Insulator, Liner, Brake Caliper Cooling Duct Replacement - Front.
1	Oil Temperature Sensor Electrical Connector
2	Oil Temperature Sensor Tighten 20 N·m (15 lb ft)

Callout

Component Name

Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications.

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
Remove the RF tire and wheel assembly. Refer to Tire and Wheel Removal and Installation.
Remove the RH front wheelhouse rear liner. Refer to Fender, Insulator, Liner, Brake Caliper Cooling Duct Replacement - Front.

Oil Temperature Sensor Electrical Connector

Oil Temperature Sensor

Tighten
20 N·m (15 lb ft)