GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the front fascia. Refer to Fascia, Valence, Fascia Close Out Panel Replacement - Front Bumper in Bumpers.
  3. Remove all related panels and components.
  4. Support the radiator assembly.
  5. Support the skid bar.

  6. Object Number: 1163192  Size: SH
  7. Remove the 4 bolts (1) attaching the skid bar to the frame rails.
  8. Remove the skid bar.
  9. Save all of the brackets, mounting studs, and accessories for transfer to the new skid bar.

Installation Procedure

  1. Transfer all of the brackets, mounting studs, and accessories to the new skid bar.
  2. Position the skid bar to the frame rails.
  3. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1163192  Size: SH
  4. Install the 4 bolts (1) attaching the skid bar to the frame rails.
  5. Tighten
    Tighten the bolts to 50 N·m (36 lb ft).

  6. Install all related panels and components.
  7. Install the front fascia. Refer to Fascia, Valence, Fascia Close Out Panel Replacement - Front Bumper in Bumpers.
  8. Lower the vehicle.