Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Hood Open Assist Rod Assembly Replacement

1

Rod Assembly, Hood Open Assist (Qty: 2)

Caution:  When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.

Notice: Apply pressure only at the end of the liftgate/hood assist rod that you are removing or attaching. Do NOT apply pressure to the middle of the rod because damage or bending will result.

Tip
Remove the metal clip at the ends of the assist rod, then pull away from stud.

Hood Replacement

1

Rod Assembly, Hood Open Assist (Qty: 2)

Caution:  When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.

Notice: Apply pressure only at the end of the liftgate/hood assist rod that you are removing or attaching. Do NOT apply pressure to the middle of the rod because damage or bending will result.

Tip

2

Bolt, Hood Hinge (Qty: 4)

Tighten
24 N·m (18 lb ft)

3

Hood Assembly

Hood Hinge Replacement

1

Rod Assembly, Hood Open Assist (Qty: 2)

Caution:  When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.

Notice: Apply pressure only at the end of the liftgate/hood assist rod that you are removing or attaching. Do NOT apply pressure to the middle of the rod because damage or bending will result.

Tip
Remove the metal clip at the ends of the assist rod, then pull away from stud.

2

Bolt, Hood Hinge (Qty: 4)

Tighten
24 N·m (18 lb ft)

4

Nut, Hood Hinge (Qty: 4)

Tighten
24 N·m (18 lb ft)

5

Hinge, Hood (Qty: 2)

Hood Open Assist Rod Stud Replacement

6

Stud, Hood Open Assist Rod (Qty: 2)

Tighten
9 N·m (80 lb in)