GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2004 🢒 Corvette 🢒 Suspension 🢒 Front Suspension 🢒 Stabilizer Shaft Link Replacement

Removal Procedure

    Object Number: 66493 Size: SH
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
  2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation.
  3. Remove the stabilizer shaft link nuts.
  4. Remove the stabilizer shaft link from the stabilizer shaft and lower control arm.

Installation Procedure

    Object Number: 66493 Size: SH
  1. Install the stabilizer shaft link into the stabilizer shaft and lower control arm.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the stabilizer shaft link nuts.

    3. Tighten
    Tighten the stabilizer shaft link nuts to 76 N·m (56 lb ft).

  3. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation.
  4. Lower the vehicle.