GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the front fascia. Refer to Front Bumper Fascia Replacement .

  2. Object Number: 63707  Size: SH
  3. Remove the front fascia retainer to bracket bolts.
  4. Remove the fascia retainer.

Installation Procedure


    Object Number: 63707  Size: SH
  1. Position the retainer to the upper bracket.
  2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the front fascia retainer to bracket bolts.
  4. Tighten
    Tighten the front fascia retainer bolts to 7 N·m (62 lb in).

  5. Install the front fascia. Refer to Front Bumper Fascia Replacement .