GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2002 🢒 Corvette 🢒 Body and Accessories 🢒 Bumpers 🢒 Fascia Grille Replacement

Removal Procedure

    Object Number: 721294 Size: SH
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the front brake caliper cooling duct. Refer to Front Brake Caliper Cooling Duct Replacement .
  3. Remove the wiring harness' retainer clips (1).
  4. Remove the clips at the top of the fascia grille (2).
  5. Remove the fascia grille screws .

    6. Object Number: 721297 Size: SH
  6. Remove the fascia grille through the front of the fascia opening.

Installation Procedure

    Object Number: 721297 Size: SH
  1. Install the fascia grille through the front of the fascia opening.

    2. Object Number: 721294 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the fascia grille screws.

    3. Tighten
    Tighten the fascia grille screws to 2 N·m (18 lb in).

  3. Install the clips at the top of the fascia grille (2).
  4. Install the wiring harness' retaining clips (1).
  5. Install the front brake caliper cooling duct. Refer to Front Brake Caliper Cooling Duct Replacement .
  6. Lower the vehicle.