GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Chevrolet
🢒
2002
🢒
Corvette
🢒
Body and Accessories
🢒
Body Rear End
🢒 Rear Compartment Lid Release Switch Replacement
Rear Compartment Lid Release Switch Replacement Domestic
Removal Procedure
Pry carefully at the lower edge of the rear compartment lid release switch to release the locking tab.
Disconnect the electrical connector from the switch.
Remove the switch.
Installation Procedure
Connect the electrical connector to the rear compartment lid release switch.
Install the switch.
Align the switch to the opening in the trim panel, then push to secure.
Rear Compartment Lid Release Switch Replacement Export
Removal Procedure
Remove the console. Refer to
Console Replacement
in Instrument Panel, Gauges and Console.
Disconnect the electrical connector from the rear compartment lid release switch.
Using a small flat bladed tool, release the switch retaining tabs from the underside of the console.
Remove the switch from the console.
Installation Procedure
Position the rear compartment lid release switch to the underside of the console.
Push the switch to secure the switch retaining tabs.
Connect the electrical connector to the switch.
Install the console. Refer to
Console Replacement
in Instrument Panel, Gauges and Console.