For 1990-2009 cars only
Removal Procedure
Important:
• Use the Sleeved Butt-Joint method to perform mid-rail repairs. • When most of the front or rear half of the rail is damaged beyond
repair, this sectioning procedure allows for the replacement of the damaged
rail half.
- Remove door side frame and the lock pillar extension panels.
- Remove floor panel and lower floor panel extension at factory seams.
- Perform sleeved butt-joint sectioning as required.
- Apply anti-corrosion materials to all inner surfaces as necessary.
| • | Do not combine paint systems. |
| • | Refer to paint manufacturer's recommendations. |
Installation Procedure
- Replace door side frame and the lock pillar extension panels.
- Replace floor panel and lower floor panel extension at factory seams.
- After sectioning repairs are completed, attach panels and components as necessary.
