For time and/or mileage intervals of scheduled maintenance items, refer to Maintenance Schedule .

The following text and illustrations describe the details of the required scheduled maintenance services.

For information on the proper fluids and lubricants to use, refer to Fluid and Lubricant Recommendations .

For the engine oil and oil filter changing procedure, refer to Engine Oil and Oil Filter Replacement in Engine Mechanical.

Notice: Oil that does not have the GM4718M specification designation can cause engine damage not covered by the warranty.

Important: DO NOT use engine oil additives in Corvette engines.

When adding to, or changing to the engine oil, use ONLY oils of the proper quality. The Corvette engine requires a special oil meeting the GM Specification 4718M. The oils meeting this GM Specification may be identified as synthetic, and should also be identified with the American Petroleum Institute (API) Certified For Gasoline Engines STARBURST symbol. However, NOT ALL Synthetic oils with the STARBURST symbol will meet this GM Specification. Look for and use ONLY the oils that meet GM Specification 4718M.

(All Corvette engines are filled at the factory with Mobil 1® synthetic oil, which meets all requirements of GM Specification 4718M.)

Notice: Using engine oils of any viscosity other than those viscosities recommended could result in engine damage.

Engine oil viscosity (thickness) has an effect on fuel economy and cold-weather operation (starting and oil flow). Lower viscosity engine oils can provide better fuel economy and cold-weather performance.

When you are choosing an engine oil viscosity, consider the range of temperatures the vehicle will be operated in before the next oil change. Then, select the recommended oil viscosity.

The recommended SAE engine oil viscosity is 5W-30, however, if temperatures are above -18°C (0°F) 10W-30 may be used.

In areas of the world other than North America, it may be difficult to find oils that display the API STARBURST symbol and that are labeled as meeting the GM4718M Specification.

If the API STARBURST is not found displaying oils identified as meeting the GM4718M requirements, look for oils that meet the API Service SJ and ACEA A3-96 requirements.

The recommended SAE engine oil viscosity is 5W-30, however, additional engine oil viscosities meeting the API Service SJ and ACEA A3-96 requirements may be used in accordance with the temperature ranges shown.

Inspect the accessory drive belts for the following:

Replace as needed. (Belts can have many small cracks in individual ribs without affecting the performance.) Refer to Drive Belt Replacement - Accessory and Air Conditioning Compressor Belt Replacement in Engine Mechanical.

Notice: DO NOT use cooling system seal tabs, or similar compounds, unless otherwise instructed. The use of cooling system seal tabs, or similar compounds, may restrict coolant flow through the passages of the cooling system or the engine components. Restricted coolant flow may cause engine overheating and/or damage to the cooling system or the engine components/assembly.

Notice: When adding coolant, use DEX-COOL® coolant. If silicated coolant is added to the system, premature engine, heater core or radiator corrosion may result. In addition, the engine coolant will require change sooner-at 50 000 km (30,000 mi) or 24 months.

Drain, flush and refill the system with a 50/50 mixture of clean, drinkable water and ONLY GM Goodwrench® DEX-COOL® or Havoline® DEX-COOL® (silicate-free) coolant. Refer to Cooling System Draining and Filling in Engine Cooling.

Manual Transmission

No fluid changing service required. For fluid level checking maintenance intervals, refer to Periodic Maintenance Inspection .

Automatic Transmission

Change both the fluid and the filter according to the maintenance schedule intervals. For maintenance schedule information, refer to Maintenance Schedule .

For the fluid and filter changing procedure, refer to Automatic Transmission Fluid and Filter Replacement in Automatic Transmission.

Replace the spark plugs according to the maintenance schedule intervals with the correct type. For maintenance schedule information, refer to Maintenance Schedule .

For information on the correct type of spark plug, refer to Maintenance Items .

For the spark plug replacement procedure, Refer to Spark Plug Replacement in Engine Electrical.

Clean the spark plug wires and inspect for burns, cracks or other damage. Check the wire boot fit at the coils and at the spark plugs. Replace wires as needed. Refer to Spark Plug Wire Replacement in Engine Electrical.

Replace the air cleaner filter according to the maintenance schedule intervals with the correct type. For maintenance schedule information, refer to Maintenance Schedule .

For information on the correct type of air cleaner filter, refer to Maintenance Items .

For the air cleaner filter replacement procedure, refer to Air Cleaner Element Replacement in Engine Controls.