GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2001 🢒 Corvette 🢒 Body and Accessories 🢒 Wiring Systems 🢒 Diagnostic System Check - Steering Wheel and Column - Tilt

Test Description

The numbers below refer to the step numbers on the diagnostic table.

  1. Lack of communication may be due to a partial malfunction of the class 2 serial data circuit or due to a total malfunction of the class 2 serial data circuit. The specified procedure will determine the particular condition.

    2.

  2. Determine if any Seat Control Module, Body Control Module,or Powertrain Control Module DTCs are present.

    3.

  3. The presence of DTCs which begin with "U" indicate some other module is not communicating. The specified procedure will compile all the available information before tests are performed.

Step

Action

Yes

No

1

Install a scan tool.

Does the scan tool power up?

Go to Step 2

Go to Scan Tool Does Not Power Up in Data Link Communications

2

  1. Turn ON the ignition, with the engine OFF.
  2. Attempt to establish communication with the following systems:
    3. • The seat control module
    • The body control module
    • The powertrain control module

Does the scan tool communicate with these systems?

Go to Step 3

Go to Scan Tool Does Not Communicate with Class 2 Device in Data Link Communications

3

  1. Select the seat control module display DTCs function on the scan tool.
  2. Select the body control module display DTCs function on the scan tool.
  3. Select the powertrain control module display DTCs function on the scan tool.

Does the scan tool display any DTCs?

Go to Step 4

Go to Symptoms - Steering Wheel and Column - Tilt

4

Does the scan tool display any DTCs which begin with a "U"?

Go to Scan Tool Does Not Communicate with Class 2 Device in Data Link Communications

Go to Step 5

5

Does the scan tool display DTC B0605?

Go to A Diagnostic System Check - Body Control System

Go to Step 6

6

Does the scan tool display DTC P0562 or P0563?

Go to Powertrain On Board Diagnostic (OBD) System Check - Automatic Transmission in Automatic Transmission

Go to Diagnostic Trouble Code (DTC) List