For 1990-2009 cars only
- Turn the steering wheel so that the vehicle's wheels are pointing straight ahead.
- Turn the ignition switch to the OFF position.
- Remove the key from the ignition switch.
- Remove the front floor kick-up panel. Refer to Front Floor Kick-Up Panel Replacement in Interior Trim.
- Remove the SDM Fuse from the IP fuse block.
- Remove the left sound insulator. Refer to Instrument Panel Insulator Panel Replacement - Left Side in Instrument Panel, Gages and Console.
- Remove the connector position assurance (CPA) from the inflatable restraint steering wheel module coil connector located at the base of the steering column.
- Disconnect the steering wheel module coil connector located at the base of the steering column.
- Remove the CPA from the inflatable restraint IP module connector located near the base of the steering column.
- Disconnect the IP module connector located near the base of the steering column.
Important: Refer to SIR Service Precautions .
Important: With the SDM Fuse removed and the ignition switch in the ON position, The AIR BAG indicator illuminates. This is normal operation, and does not indicate an SIR system malfunction.
