GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2001 🢒 Corvette 🢒 Body and Accessories 🢒 Roof 🢒 Roof Lift Off Panel/Window Rear Latch Replacement

Removal Procedure

    Object Number: 63735 Size: SH
  1. Remove the roof lift off panel.

    2. Object Number: 63743 Size: SH
  2. Remove the screws attaching the latch cover.
  3. Remove the latch cover from the roof panel.

    4. Object Number: 63744 Size: SH
  4. Remove the bolts from the latch.
  5. Remove the latch from the roof panel.

Installation Procedure

    Object Number: 63744 Size: SH
  1. Position the latch to the roof panel.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the bolts to the latch.

    3. Tighten
    Tighten the roof rear latch bolts to 10 N·m (89 lb in).


    Object Number: 63743 Size: SH
  3. Install the latch cover and attaching screws.

    4. Tighten
    Tighten the roof rear latch cover screws to 3 N·m (27 lb in).


    Object Number: 63735 Size: SH
  4. Install the roof lift off panel.
  5. Adjust if necessary. Refer to Roof Lift Off Panel Adjustment .