GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2001 🢒 Corvette 🢒 Body and Accessories 🢒 Body Rear End 🢒 Rear Compartment Lid Latch Striker Replacement

Removal Procedure

    Object Number: 213993 Size: SH
  1. Mark the location of the striker as an aid in installation.
  2. Remove the bolts attaching the striker to the lid.
  3. Remove the striker.

Installation Procedure

    Object Number: 213993 Size: SH
  1. Position the striker to the lid with the arrow pointed down.
  2. Install the left side bolt first. (net locating hole).

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the right side bolt.

    4. Tighten
    Tighten the rear compartment lid latch striker bolts to 10 N·m (89 lb in).