GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2001 🢒 Corvette 🢒 Body and Accessories 🢒 Body Rear End 🢒 Rear Compartment Lid Latch Replacement

Removal Procedure

    Object Number: 214004 Size: SH
  1. Open the rear compartment.
  2. Remove the rear center carpet panel.
  3. Disconnect the electrical harness connector.
  4. Mark the location of the latch to aid in installation.
  5. Remove the bolts attaching the latch to the latch bracket.
  6. Remove the latch.

Installation Procedure

    Object Number: 214004 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  1. Install the bolts attaching the latch to the latch bracket.

    2. Tighten
    Tighten the rear compartment lid latch bolts to 10 N·m (89 lb in).

  2. Route the manual release cable down to the rear center floor stowage compartment.
  3. Connect the electrical harness connector.
  4. Install the rear center carpet panel.