GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2001 🢒 Corvette 🢒 Body and Accessories 🢒 Body Rear End 🢒 Rear Compartment Lid Hinge Replacement

Removal Procedure

    Object Number: 214000 Size: SH
  1. Open and support the rear compartment lid.
  2. Mark the location of the hinge to aid in installation.
  3. Remove the bolts attaching the hinge to the body.
  4. Remove the bolts attaching the hinge to the lid.
  5. Remove the hinge.

Installation Procedure

    Object Number: 214000 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  1. Install the bolts attaching the hinge to the lid.

    2. Tighten
    Tighten the rear compartment hinge to lid bolts to 31 N·m (23 lb ft).

  2. Install the bolts attaching the hinge to the body.

    3. Tighten
    Tighten the rear compartment hinge to body bolts to 25 N·m (18 lb ft).

  3. Remove support and lower lid.