GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2001 🢒 Corvette 🢒 Body and Accessories 🢒 Body Rear End 🢒 Rear Compartment Lift Window Hinge Replacement

Removal Procedure

    Object Number: 71238 Size: SH
  1. Remove the rear compartment lift window panel. Refer to Rear Compartment Lift Window Panel Replacement .

    2. Object Number: 71239 Size: SH
  2. Remove the bolts attaching the hinge to the lift window panel.

Installation Procedure

    Object Number: 71239 Size: SH
  1. Position the hinge to the lift window panel.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the bolts attaching the hinge to the lift window panel.

    3. Tighten
    Tighten the lift window hinge bolts to 25 N·m (18 lb ft).


    Object Number: 71238 Size: SH
  3. Apply sealer around the hinge studs.
  4. Install the rear compartment lift window panel. Refer to Rear Compartment Lift Window Panel Replacement .