The transmission contains an excessive amount of fluid.

1. Check the transmission fluid level.
2. Adjust the transmission fluid level as necessary.

Refer to Transmission Fluid Level Inspection .

The transmission vent or vent hose is plugged.

Clear or replace the transmission vent or vent hose.

Refer to Transmission Vent Tube Replacement .

The transmission has worn or damaged shaft to case seals.

1. Remove the transmission.

Refer to Transmission Replacement .

2. Inspect the following transmission seals for wear or damage:

•	Output shaft inner and outer seals

•	Input shaft seal

•	Shift shaft inner and outer seals

Refer to Transmission Disassemble in the Transmission Unit Repair Manual.