GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2001 🢒 Corvette 🢒 HVAC 🢒 Heating, Ventilation and Air Conditioning 🢒 Floor Rear Air Outlet Duct Replacement - Left Side

Removal Procedure

    Object Number: 95652 Size: SH
  1. Remove the console. Refer to Console Replacement in Instrument Panel, Gauges and Console.
  2. Remove the IP accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement in Instrument Panel, Gauges and Console.
  3. Remove the driver knee bolster trim panel. Refer to Driver Knee Bolster Panel Replacement in Instrument Panel, Gauges and Console.
  4. Grasp the floor air outlet rear duct - LH and rotate 1/4 turn clockwise to release.

    5. Carefully use a flat bladed tool to release the duct, if necessary.

  5. Remove the duct.

Installation Procedure

    Object Number: 95652 Size: SH
  1. Position the floor air outlet rear duct - LH in the same position in which it was released (¼ turn above the installed position).
  2. Insert and seat the duct into the HVAC module.
  3. Rotate the duct ¼ turn counterclockwise to secure.
  4. Install the driver knee bolster trim panel. Refer to Driver Knee Bolster Panel Replacement in Instrument Panel, Gauges and Console.
  5. Install the IP accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement in Instrument Panel, Gauges and Console.
  6. Install the console. Refer to Console Replacement in Instrument Panel, Gauges and Console.