Hydraulic Hose Replacement Clutch Actuator Cylinder

1. Remove the clutch actuator cylinder. Refer to Clutch Actuator Cylinder Replacement .
2. Use a small drift or punch to remove the roll-pin retaining the hydraulic hose to the actuator cylinder.



3. Remove the hydraulic hose from the actuator cylinder.
4. Drain off the excess fluid from the actuator cylinder into a container.

1. Install the new clutch actuator cylinder hose to the clutch actuator cylinder.

Check the new O-ring seal for proper placement on the actuator cylinder hose.




2. Install the actuator cylinder hose roll-pin retainer using a small drift or punch.
3. Rotate the actuator cylinder hose to ensure freedom of movement.
4. Install the clutch actuator cylinder. Refer to Clutch Actuator Cylinder Replacement .