Tools Required

J 43244 Relay Puller Pliers

1. Remove the underhood electrical center cover.
2. Using the J 43244 , remove the cooling fan relay. Refer to Electrical Center Identification Views in Wiring Systems for the correct location.

Notice: Installation of the proper relay is critical. If an enhanced relay -- equipped with a diode -- is installed into a position requiring a standard relay -- equipped without a diode -- excessive current will damage any components associated with the relay or its associated circuits.

1. Install the cooling fan relay. Refer to Electrical Center Identification Views in Wiring Systems.
2. Install the underhood electrical center cover.