Step | Action | Value(s) | Yes | No | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
DEFINITION: Remote CD Player is not operating correctly and the radio operates normally. | ||||||||||||
1 | Were you sent here from the Radio Audio Diagnostic System Check? | -- | ||||||||||
2 |
Does the test light illuminate? | -- | ||||||||||
3 | Repair the open or high resistance in circuit 440. Is the repair complete? | -- | -- | |||||||||
4 | Connect a test light between the Remote CD Player connector terminal 5 and terminal 7. Does the test light illuminate? | -- | ||||||||||
5 | Repair the open or high resistance in the ground circuit 351. Is the repair complete? | -- | -- | |||||||||
6 |
Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | -- | ||||||||||
7 | Test the E & C Data Buss circuit 835 for the following conditions:
Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | -- | ||||||||||
8 | Replace the Remote CD Player. Refer to Remote CD Changer Replacement . Is the repair complete? | -- | -- | |||||||||
9 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | |||||||||
