GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1999 🢒 Corvette 🢒 Body and Accessories 🢒 Wipers/Washer Systems 🢒 Air Inlet Screen Replacement

Removal Procedure

    Object Number: 71296 Size: SH
  1. Open the hood.
  2. Remove the plenum to hood seal.
  3. Remove the wiper arms. Refer to Windshield Wiper Arm Replacement .

    4. Object Number: 171177 Size: SH
  4. Remove the push-in retainers from the engine edge of the screen.

    5. Object Number: 70096 Size: SH

    Notice: Be sure to follow the service procedure when removing the air inlet grille panel. Failure to follow service procedure may cause damage to the air inlet grille panel or the windshield.

  5. Slide the screen down and out from under the edge of the windshield.
  6. Disconnect the washer hoses from the bottom side of the screen.
  7. Remove the air inlet screen.

Installation Procedure

    Object Number: 70096 Size: SH
  1. Position the air inlet screen to the opening.
  2. Install the windshield washer hoses to the under side of the screen.
  3. Install the screen by engaging the screen clips under the edge of the windshield.

    4. Object Number: 171177 Size: SH
  4. Secure the engine side of the screen with the push-in retainers.
  5. Install the wiper arms. Refer to Windshield Wiper Arm Replacement .

    6. Object Number: 71296 Size: SH
  6. Install the plenum to hood seal.
  7. Close the hood.