GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1999 🢒 Corvette 🢒 Body and Accessories 🢒 Lighting Systems 🢒 Fog Lamp Switch Illumination Lamp Inoperative

Fog Lamp Switch Illumination Lamp Inoperative US and Canada

Fog Lamp Switch Illumination Is Inoperative (Domestic)

Step

Action

Value(s)

Yes

No

1

Were you sent here from the Interior Lights Dimming System Check?

--

Go to Step 2

Go to Interior Lights Dimming System Check

2
  1. Disconnect the fog lamp/rear compartment lid release switch connector.
  2. Connect a DMM between the fog lamp/rear compartment lid release switch connector terminal 7 and ground.
  3. Turn the headlamp switch to the PARK position.
  4. Measure the voltage at the fog lamp/rear compartment lid release switch connector terminal 7.

Is the voltage within the specified values?

10.0-14.0V

Go to Step 3

Go to Step 8

3
  1. Disconnect the instrument cluster connector.
  2. Connect a DMM between the fog lamp/rear compartment lid release switch connector terminal 8 and the instrument cluster connector terminal B5.
  3. Measure for continuity in CKT 717 between the instrument cluster connector and the fog lamp/rear compartment lid release switch connector.

Is continuity present in CKT 717?

--

Go to Step 5

Go to Step 4

4

Repair open in CKT 717.

Is the repair complete?

--

Go to Interior Lights Dimming System Check

--

5
  1. Reconnect the fog lamp/rear compartment lid release switch connector.
  2. Move the headlamp switch to the PARK position.
  3. Connect a jumper wire (10 A) between the instrument cluster connector terminal B5 and ground.

Does the fog lamp/rear compartment lid release switch illumination lamp come ON?

--

Go to Step 6

Go to Step 7

6

Replace the instrument cluster.

Refer to Instrument Cluster Replacement .

Is the repair complete?

--

Go to Interior Lights Dimming System Check

--

7

Replace the fog lamp/rear compartment lid release switch illumination bulb.

Is the repair complete?

--

Go to Interior Lights Dimming System Check

--

8

Are the electronic traction suspension control switch and the instrument cluster illumination lamps inoperative?

--

Go to Step 9

Go to Step 10

9

Replace the headlamp switch.

Refer to Multifunction Turn Signal Lever Replacement - On Vehicle .

Is the repair complete?

--

Go to Interior Lights Dimming System Check

--

10

Repair the open in CKT 9.

Is the repair complete?

--

Go to Interior Lights Dimming System Check

--

Fog Lamp Switch Illumination Lamp Inoperative Export

Fog Lamp Switch Illumination Is Inoperative (Export)

Step

Action

Value(s)

Yes

No

1

Were you sent here from the Interior Lights Dimming System Check?

--

Go to Step 2

Go to Interior Lights Dimming System Check

2
  1. Disconnect the fog lamp switch connector.
  2. Connect a DMM between the fog lamp switch connector terminal 7 and ground.
  3. Turn the headlamp switch to the PARK position.
  4. Measure the voltage at the fog lamp switch connector terminal 7.

Is the voltage within the specified values?

10.0-14.0V

Go to Step 3

Go to Step 8

3
  1. Disconnect the instrument cluster connector.
  2. Connect a DMM between the fog lamp switch connector terminal 8 and the instrument cluster connector terminal B5.
  3. Measure for continuity in CKT 717 between the instrument cluster connector and the fog lamp switch connector.

Is continuity present in CKT 717?

--

Go to Step 5

Go to Step 4

4

Repair open in CKT 717.

Is the repair complete?

--

Go to Interior Lights Dimming System Check

--

5
  1. Reconnect the fog lamp switch connector.
  2. Move the headlamp switch to the PARK position.
  3. Connect a jumper wire (10 A) between the instrument cluster connector terminal B5 and ground.

Does the fog lamp switch illumination lamp come ON?

--

Go to Step 6

Go to Step 7

6

Replace the instrument cluster.

Refer to Instrument Cluster Replacement .

Is the repair complete?

--

Go to Interior Lights Dimming System Check

--

7

Replace the fog lamp switch illumination bulb.

Is the repair complete?

--

Go to Interior Lights Dimming System Check

--

8

Are the electronic traction suspension control switch and the instrument cluster illumination lamps inoperative?

--

Go to Step 9

Go to Step 10

9

Replace the headlamp switch.

Refer to Multifunction Turn Signal Lever Replacement - On Vehicle .

Is the repair complete?

--

Go to Interior Lights Dimming System Check

--

10

Repair the open in CKT 9.

Is the repair complete?

--

Go to Interior Lights Dimming System Check

--