LH/RH Vanity Mirror inoperative
Step
| Action
| Value(s)
| Yes
| No
|
1
| Were you
sent here from the Interior Lights System Check?
| --
|
Go to Step 2
| Go to
Interior Lamps System Check
|
2
| Check the MONITORED LD MiniFuse ® #2 for an open.
Is the fuse open?
| --
|
Go to Step 3
|
Go to Step 4
|
3
| Repair CKT
640 for a short to ground.
Is the repair complete?
| --
| Go to
Interior Lamps System Check
| --
|
4
|
- Connect a DMM between the inoperative (LH/RH) vanity mirror connector
terminal B and ground.
- Measure for continuity to ground in the CKT 150.
Is the CKT 150 continuous to ground?
| --
|
Go to Step 6
|
Go to Step
5
|
5
| Repair CKT 150 for an open or a short to battery voltage.
Is the repair complete?
| --
| Go to
Interior Lamps System Check
| --
|
6
|
- Connect the DMM between the inoperative (LH/RH) vanity mirror
connector terminal A and ground.
- Remove the MONITORED LD Micro Relay #37 from the Instrument Panel
Electrical Center.
- Connect a fuse jumper between the BAT terminal and the CKT 640
terminal (which is used for the MONITORED LD Micro Relay #37) in the Instrument
Panel Electrical Center.
- Measure the available voltage at the vanity mirror connector.
Is the measured voltage within the specified value?
| 10.0-14.0V
|
Go to Step 8
|
Go to Step 7
|
7
| Repair CKT 640 for an open.
Is the repair complete?
| --
| Go to
Interior Lamps System Check
| --
|
8
| Replace the (LH/RH) vanity mirror lamp.
Refer to
Vanity Mirror Lamp Replacement
.
Is the repair complete?
| --
| Go to
Interior Lamps System Check
| --
|
