GM Service Manual Online
For 1990-2009 cars only

Parking Brake Cable Replacement Front

Removal Procedure


    Object Number: 99268  Size: SH
  1. Remove the parking brake lever. Refer to Park Brake Lever Assembly Replacement .
  2. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  3. Remove the RH muffler. Refer to Muffler Replacement in Engine Exhaust.
  4. Disconnect the rear parking brake cables from the equalizer.
  5. Disconnect the front parking brake cable from the cable retainer.

  6. Object Number: 63997  Size: SH
  7. Remove the front parking brake cable bracket from the tunnel.
  8. Lower the vehicle.
  9. Remove the front cable from the vehicle
  10. Remove the pass-through grommet and front bracket from the cable.

Installation Procedure


    Object Number: 63997  Size: SH
  1. Install the front bracket and pass-through grommet to the cable.
  2. Install the front parking brake cable to the vehicle. Insure the pass-through grommet is properly installed.
  3. Raise the vehicle.
  4. Install the front parking brake cable bracket to the tunnel.

  5. Object Number: 99268  Size: SH
  6. Connect the front parking brake cable to the parking brake cable retainer.
  7. Connect the rear parking brake cables to the equalizer.
  8. Install the RH muffler. Refer to Muffler Replacement in Engine Exhaust.
  9. Lower the vehicle.
  10. Install the parking brake lever. Refer to Park Brake Lever Assembly Replacement .

Parking Brake Cable Replacement Rear

Removal Procedure


    Object Number: 99268  Size: SH
  1. Disable the parking brake automatic adjuster. Refer to Parking Brake Cable Adjuster Disabling .
  2. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  3. Remove the RH muffler. Refer to Muffler Replacement in Engine Exhaust.
  4. Disconnect the rear parking brake cable at the retainer and equalizer.

  5. Object Number: 63999  Size: SH
  6. Remove the rear parking brake cable from the rear suspension mounting bracket.
  7. Remove the rear parking brake cable retainer nut.
  8. Remove the rear parking brake cable from the vehicle.

Installation Procedure

  1. Install the rear parking brake cable to the vehicle.
  2. Install the rear parking brake cable retainer nut.

  3. Object Number: 64001  Size: SH
  4. Connect the rear parking brake cable to the rear suspension mounting bracket.

  5. Object Number: 99268  Size: SH
  6. Connect the rear parking brake cable to the retainer and equalizer.
  7. Install the RH muffler. Refer to Muffler Replacement in Engine Exhaust.
  8. Lower the vehicle.
  9. Enable parking brake automatic adjuster. Refer to Parking Brake Cable Adjuster Enabling .