GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1999 🢒 Corvette 🢒 Suspension 🢒 Tire Pressure Monitoring 🢒 Low Tire Pressure Indicator Sensor Replacement

Removal Procedure

    Object Number: 65674 Size: SH
  1. Raise the vehicle on a suitable support. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  3. Remove the tire from the wheel. Refer to Tire Mounting and Dismounting in Tires and Wheels.
  4. Remove the TPM sensor nut.
  5. Remove the TPM sensor.

Installation Procedure

    Object Number: 65676 Size: SH
  1. Position the sensor.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the sensor nut.

    3. Tighten
    Tighten the nut to 12 N·m (106 lb in).

  3. Install the tire on the wheel. Refer to Tire Mounting and Dismounting in Tires and Wheels.
  4. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  5. Lower the vehicle.
  6. Program the TPM sensors. Refer to Tire Pressure Monitoring Sensor Programming .