GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

Tools Required

    • J 9519-E Ball Joint Remover Kit
    • J 28685 Upper Ball Joint Installater
    • J 21474-5 Upper Ball Joint Remover

    Object Number: 289955  Size: SH
  1. Remove the steering knuckle from the vehicle. Refer to Steering Knuckle Replacement .
  2. Remove the ball joint from the steering knuckle using J 9519-E andJ 21474-5 .

Installation Procedure


    Object Number: 289955  Size: SH
  1. Install the ball joint stud into the steering knuckle using J 9519-E and J 28685 .

  2. Object Number: 65333  Size: SH
  3. Install the steering knuckle to the vehicle. Refer to Steering Knuckle Replacement .