GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1999 🢒 Corvette 🢒 Engine 🢒 Engine Electrical 🢒 Generator Bracket Replacement

Removal Procedure

    Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to the vehicle or its components.

  1. Remove the generator. Refer to Generator Replacement .

    2. Object Number: 65354 Size: SH
  2. Remove the power steering pump. Refer to Power Steering Pump Replacement in Power Steering.
  3. Remove the generator bracket bolts.
  4. Remove the generator bracket from the cylinder head.

Installation Procedure

    Object Number: 65354 Size: SH
  1. Install the generator bracket to the cylinder head.

    2. Tighten
    Tighten the generator bracket bolts to 50 N·m (37 lb ft).

  2. Install the power steering pump. Refer to Power Steering Pump Replacement in Power Steering.
  3. Install the generator. Refer to Generator Replacement .