FOLDING TOP LATCH INOPERATIVE REPAIR KIT FOR SPRING AND PIN

MODEL AND YEAR: 1986 CORVETTE CONVERTIBLE

Customer comments of inoperative rear bow latches on 1986 Corvette convertibles may be due to a broken spring an the latch assembly.

A repair kit, P/N 10070300, is available through GMSPO to replace the broken spring and pivot pin.

The kit consists of two (2) springs, two (2) pins and an instruction sheet with illustrations.

If it becomes necessary to replace the spring on one latch, perform the operation on the remaining latch at the same time.

Labor Operation Number: B3620 Right B3621 Left Labor Time : .3 Hours .3 Hours

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.