GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Cobalt 🢒 Engine 🢒 Engine Mechanical - 2.2L or 2.4L 🢒 Engine Mount Bracket Replacement

Removal Procedure

    Object Number: 1656094 Size: SH
  1. Remove the engine mount. Refer to Engine Mount Replacement.
  2. Remove the engine mount bracket to engine bolts.
  3. Remove the engine mount bracket.

Installation Procedure

    Object Number: 1656094 Size: SH
  1. Position the engine mount bracket to the engine.
  2. Install the engine mount bracket bolts in the following locations:
    3. • The long bolts in the forward and lower front holes
    • The short bolt in the upper rear hole

    Caution: Refer to Fastener Caution in the Preface section.

  3. Tighten the engine mount bracket bolts in the sequence shown to 100 N·m (74 lb ft).
  4. Install the engine mount. Refer to Engine Mount Replacement.