Tools Required
• |
J 28467-B
Universal Engine Support Fixture |
Installation Procedure
- Remove the air cleaner assembly. Refer to
Air Cleaner Assembly Replacement
.
- Place the engine support fixture legs (1) from the
J 28467-B
across the engine compartment.
- Install the engine support fixture legs (1) from the
J 28467-500
on the engine support fixture long bar (2).
- Install the radiator shelf tube J-28467-2A (1) on top of the strut tower
tube J-28467-3 (2) above the engine front (right back) lift hook bracket.
- Install the round tube of the front support assembly J-28467-4A (3) through the large hole in the radiator shelf tube J-28467-2A.
- Locate the J-28467-4A front support assembly to the upper tie bar.
- Install the J-28467-9 7/16 inch x 2.0 inch quick-release pin (4) through the top hole in the J-28467-4A front support assembly.
- Install the J-28467-1A cross bracket assembly (1).
- Hand tighten the J-28467-1A cross bracket wing nuts (2).
- Install the J-28467-7A bolt hook through the J-28467-6A bracket.
- Install the J-28467-34 lift hook wing nut and washer to the J-28467-7A lift hook.
- Repeat the previous 2 steps in order to assemble 2 lift hooks and brackets.
- Install one of the lift hook and bracket assemblies (1) to the engine support fixture long bar (2).
- Install the other lift hook and bracket assembly (3) to the J-28467-2A radiator shelf tube (4) above the engine front lift bracket.
- Install the lift hook J-28467-7A through the engine rear lift bracket (2).
- Install the lift hook J-28467-7A (3) through the engine front lift bracket (4).
- Hand tighten the lift hook wing nuts J-28467-34 (5) in order to remove all slack from the engine support fixture assembly.