Caution: Refer to Brake Fluid Irritant Caution in the Preface section.

Notice: Refer to Brake Fluid Effects on Paint and Electrical Components Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

1. Remove the brake master cylinder. Refer to Master Cylinder Replacement .
2. Drain the reservoir.
3. Secure the brake master cylinder in a vise.

1

Connector, Brake Fluid Level Indicator Switch

2

Switch, Brake Fluid Level Indicator

Tip
Depress the tabs on the indicator switch and remove the indicator switch from the reservoir.

3

Pin, Brake Master Cylinder Reservoir (Qty: 2)

4

Reservoir, Brake Master Cylinder

5

Seal, Brake Master Cylinder Reservoir (Qty: 2)

Tip
Lubricate the new seals with clean GM approved , or equivalent DOT 3 brake fluid.

6

Cap, Brake Master Cylinder Reservoir