Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

1

Emblem, Door (Supercharged)

Tip

1

Front Door Emblem (SS)

Tip

1. Use a Heat Gun or equivalent to remove the old emblem. Clean all the adhesive residue from the door, wipe surface dry with a clean lint-free towel prior to installing the new emblem.
2. When removing protective liners from adhesive backed emblems, be careful not to touch tape with hands and do not allow tape to come in contact with dirt or any foreign matter prior to adhesion.
3. Install the emblem with the door in the closed position.
4. Ensure full adhesion is made when installing the new emblem to the door.

2

Front Door Emblem

Tip

1. Use a Heat Gun or equivalent to remove the old emblem. Clean all the adhesive residue from the door, wipe surface dry with a clean lint-free towel prior to installing new emblem.
2. When removing protective liners from adhesive backed emblems, be careful not to touch tape with hands and do not allow tape to come in contact with dirt or any foreign matter prior to adhesion.
3. Install the emblem with the door in the closed position.
4. Ensure full adhesion is made when installing the new emblem to the door.