1. Turn Signal Lamp

2. Taillamp/Stoplamp

3. Back-up Lamp

To replace one of these bulbs, do the following:

1. Open the trunk. See Trunk for more information.



2. Unscrew the fastener located on the inside of the trunk at the rear of the vehicle.
3. Pull back the trunk trim.



4. Remove the three plastic wing nuts.



5. Pull out the taillamp assembly to expose the backplate.



6. Remove the backplate by pulling up on the two upper and two lower tabs.
7. Pull the old bulb to remove it from the socket.
8. Replace the bulb.
9. Reverse the steps to reassemble the backplate and attach the taillamp assembly to the vehicle. Make sure that all four tabs of the backplate are securely fastened to the taillamp assembly before reinstalling it on the vehicle.

When reinstalling the taillamp assembly, align the assembly so that the trunk lid does not contact it.

10. Close the trunk.