Removal Procedure
- Close the sunroof.
- Lower the headliner as necessary. Refer to
Headlining Trim Panel Replacement.
- Disconnect the wire harness connectors from both ends of the sunroof control module (8).
- Remove the nylon tie straps from the control module (8).
- Remove the control module (8) from the sunroof assembly by sliding the control module towards the right of the vehicle.
Installation Procedure
- Install the sunroof control module to the sunroof assembly by sliding the control module (8) towards the left side of the vehicle.
- Install the nylon tie straps to the control module (8).
- Connect the wire harness connectors to both ends of the control module (8).
- Install the headliner, as necessary. Refer to
Headlining Trim Panel Replacement.
- Check for proper operation of the sunroof.
- Refer to
Control Module References for programming and setup information.