Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Power Window Schematics Connector End View Reference: Power Door Systems Connector End Views | |||
1 | Did you perform the Diagnostic System Check - Vehicle? | Go to Step 2 | Go to Diagnostic System Check - Vehicle in Vehicle DTC Information |
2 | Try to operate the power windows. Do the power windows operate correctly? | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 |
Does the test lamp illuminate? | Go to Step 4 | Go to Step 5 |
4 | Connect a test lamp between the ignition 3 voltage circuit of the driver window switch connector and the ground circuit of the driver window switch connector. Refer to Circuit Testing in Wiring Systems. Does the test lamp illuminate? | Go to Step 6 | Go to Step 10 |
5 | Inspect for a poor connection or open in the ignition 3 voltage circuit of the driver window switch. Refer to the following in Wiring Systems: Did you find and correct the condition? | Go to Step 11 | Go to Step 8 |
6 | Test the lockout signal circuit at the drivers window switch connector for a short to ground. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 11 | Go to Step 7 |
7 | Inspect for poor connections at the driver window switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 11 | Go to Step 9 |
8 | Repair the short to ground in the ignition 3 voltage circuit of the driver window switch. Refer to Wiring Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 11 | -- |
9 | Replace the driver window switch. Refer to Front Side Door Window Switch Replacement - Left Side . Is the repair complete? | Go to Step 11 | -- |
10 | Repair the poor connection or open in the ground circuit of the driver window switch. Refer to the following in Wiring Systems: Is the repair complete? | Go to Step 11 | -- |
11 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 2 |
