GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Chevrolet
🢒
2007
🢒
Chevy Suburban - 4WD
🢒
General Information
🢒
General Information
🢒 Trailer Hitch Replacement
Removal Procedure
Disconnect the trailer wiring harness.
Remove the hitch platform bolts from the frame rails and the rear bumper.
Remove the hitch platform from the vehicle.
Installation Procedure
Position the hitch platform to the vehicle.
Notice:
Refer to
Fastener Notice
in the Preface section.
Install the platform hitch bolts to the frame rails and the rear bumper.
Tighten
•
Tighten the trailer hitch-to-frame bolts to 113 N·m (83 lb ft).
•
Tighten the trailer hitch-to-bumper bolts to 95 N·m (70 lb ft).
Connect the trailer wiring harness.