GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Chevy Suburban - 2WD 🢒 Body Repair 🢒 Bolted Exterior Body Panels and Closures 🢒 Cargo Box Stowage Box Replacement

Removal Procedure

  1. Remove the rear compartment cover assembly. Refer to Cargo Box Front Cover, Center Cover, and Rear Cover Replacement.
  2. Remove the assist handle. Refer to Endgate Assist Handle Replacement.
  3. Remove the cargo box stowage lid assembly. Refer to Cargo Box Stowage Box Lid Replacement.

    4. Object Number: 1708945 Size: SH
  4. Remove the lamp socket from the pickup box side courtesy lamp.
  5. Remove the cargo tie-down bolts and tie rings from the body side inner panel.
  6. Remove the cargo box stowage box (2) from the vehicle.

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1708945 Size: SH
  1. Install the cargo box stowage box (2) to the vehicle and tighten to 9 N·m (80 lb in).
  2. Install the cargo tie-down rings and bolts to the body side inner panel and tighten to 9 N·m (80 lb in).
  3. Install the cargo box stowage lid assembly. Refer to Cargo Box Stowage Box Lid Replacement.
  4. Install the lamp socket to the pickup box side courtesy lamp assembly.
  5. Install the assist handle. Refer to Endgate Assist Handle Replacement.
  6. Install the rear compartment cover assembly. Refer to Cargo Box Front Cover, Center Cover, and Rear Cover Replacement.